i bought the ics from kenon and i don't seem to be able to get it to work
i think i'm missing something,
1]do you have to have batteries in the car
2]do you have to have tx on
3]when i try to close program it won't unless i use task mgr
i did get the light on the car to come on dim,but still nothing loads or reads any help would be appreciated
__________________
an eye for an eye will make the whole world blind
i bought the ics from kenon and i don't seem to be able to get it to work
i think i'm missing something,
1]do you have to have batteries in the car
2]do you have to have tx on
3]when i try to close program it won't unless i use task mgr
i did get the light on the car to come on dim,but still nothing loads or reads any help would be appreciated
lug
you need to:start the program ,set the com, hook it up with no batterys tx and switch off and then hold the bind button toll the light comes on solid
thats the step i missed thank you yas
how was your awd
so far so good..... i tried the oneway first but every time i turned while hard in the throttle it got flicked end over end
so now i have diff in the front and rear 94 mm with a nsx body like tj but i needed to install the wing.... the rear was way to loose
awd seems easy to drive.... i can be aggressive and it steers better on throttle
ididnt have to change my drive style too much
every thing is new and has too much engine braking/frictional loss.... seems slow compaired to my pan.... i will be working on some friction reduction today
ok tried it it seemed to work but what is v.inertia do and how do you know that it loaded or programmed the car because i hit program i didn't see any lights flash or anything else happen but when i hit read it read what i programed it to so did it work
__________________
an eye for an eye will make the whole world blind
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»