Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2020.06.27, 02:40 PM   #1
SuperFly
bitPimp
 
SuperFly's Avatar
 
Join Date: May 2004
Location: Portland, Oregon
Posts: 589
Alternative headlight connections

I have a few cars with headlights, and I really like driving with them. However, after years of use, I can't seem to train myself to remember that the body is attached to the chassis with a delicate cable, and more often than not I give it an unnecessary yank when I go to change batteries. I want to figure out an alternative connection that either eliminates or mitigates this problem. I know the Kyosho light kits use the port on the board, but I'm not concerned about brake light function for this discussion, just 6v power.

Two ideas I have are a magnetic connection, and a connection involving the side body clips, or the area right near them.

I've been looking for a micro magnetic connector, but so far haven't found one. I'm thinking about something like Mac laptop power cables that is held in place magnetically, but will release without damage if pulled.

The side clip idea is the one I actually am more interested in, as it seems slicker. If I had the skills and materials, I can imagine just having a wire or thin copper strip that goes from the battery terminals to the chassis slot where the body clips attach; and then on the body, the positive lead goes to driver's side, and neg lead to passenger side body clip, and the connection is made when the clip enters the slot.

A third idea is just adding a couple button cells and a switch and having the lights self-powered, but that seems like a lot of weight up high.

Anyone tried anything similar, or have any ideas or suggestions?
__________________

mini-z gallery


PDX Mini-Z

Last edited by SuperFly; 2020.06.27 at 05:08 PM.
SuperFly is online now   Reply With Quote
Old 2020.06.27, 03:30 PM   #2
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 34,728
Send a message via AIM to arch2b
subscribed!
arch2b is offline   Reply With Quote
Old 2020.06.28, 12:05 AM   #3
TPDazzle
Registered User
 
Join Date: Oct 2016
Location: Tri-Cities, WA
Posts: 179
I have never tried this, but here are my thoughts:

1.) Plug the lights into your board
2.) Cut the wires so that they will reach the indent for the rear body mounts .
3.) Wrap copper foil around body indent on both sides.
4.) Solder or epoxy positive on one side, negative on the other.
5.) Do the same thing on the body, making sure the copper foil is on the part that mates with the chassis and positive and negative match.

If all goes well, the circuit would open when you take the body off, and close when you put it on, and you would keep the brake light functionality.

This is all very theoretical. I haven't worked with copper foil much. As I think about it, it might be better to use the same process with the front mount because it is tighter, and you could just attach flat strips of copper to the chassis and body instead of some more challenging contours.

Good luck!
TPDazzle is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
F355 front body mount alternative? im8im8 Miscellaneous Discussion 6 2011.05.13 11:00 PM
Headlight Install C_Rus Beginner Questions 10 2007.05.21 09:15 AM
Antenna Alternative? Mirage Mini-Z Overland MV-01 5 2003.11.04 01:55 PM
alternative Ol bodies and wheels PAULANGELO Mini-Z Overland MV-01 22 2003.10.13 03:30 PM
puegot headlight solution herman Setups 31 2002.11.16 12:04 PM


All times are GMT -5. The time now is 12:55 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts