i have a few sets of std fronts that i can sell to you. the hubs are different sizes and the grooves are spaced differently from front to rear. a +3 in the front is going to cause alignment problems with the grooves and durability. next run i can make a +2 (i think). once i get through the first few initial runs i will have many options. you will be able to purchase lips alone or hubs alone, different colors (grey and white) and i have some other wheel pattern designs that look good too! this is going to be an on going deal and i may even offer one pc wheels too down the road!
__________________
MantisWorx www.rcshox.com
professional RC products
do you have a picture of the second part? the hub ?
the middle is the second part/hub.
Rune, the wheels wiil be sold without the tool in the future but if you do not have the tool you will damage the wheel when you try to adjust offsets.
for those that ordered the wheels already and for those that plan on purchasing them it is VERY important that you glue the rear wheels from the inside once you have found your prefered offset, the front not so much but if you get hit hard in the rear without glue the wheel will move. and it is also important that you only try to adjust the wheels in the same direction , dont go fwd and then try and go the opposite way. the face of the hub goes on top of the tool and you press the lip down on to the hub. if you pass up ur offset just go all the way through and start over.
what do you guys think about this design:
i made two sets this way today just to see what it would look like!
__________________
MantisWorx www.rcshox.com
professional RC products
probably not but the front rims are 19mm in dia and when you use normal tires they are the same diameter as LM rims with LM tires but you get a better selection of front tires. i will post a pic late tonight of a LM body with the wheels on it.
__________________
MantisWorx www.rcshox.com
professional RC products
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»