Name: Khang
Location: Chula Vista, CA
Email: ooragnahk@hotmail.com
Description: 2.4 conversion set replaced with sp8m4 fets
Price: 150 shipped stateside only
New 2.4 conversion set. Comes with everything it came with and a set of sp8m4 fets.
3010 have been replaced with sp8m4s.
Tx is fine as I could match it with my running rides, and the board is fine as well as I could match it too. Will include a pair of new fets as I think the topside one is burnt.
*****The board needs work, but I am hoping to sell it to someone who can work on it themselves as I normally wouldn't put up a crappy board like this...
I don't have the tools, time, patience, or skill to work with it yet, nor do I want to pump in anymore money into this board.
Servo is unattached and the wiring/solder work looks really really bad and are basically hanging on by threads...
With the right work, it should be good as new.
I will cut my losses and just get another chassis set as my current crop of motors and customs don't even warrant the fets...
"Question" (dwight, the office) When you say soldering/wiring, do you mean the fet swap is really really bad or just the wires soldered on the board? and did you say the board works? just wanting to know if there are fried fets or something worse. thanks
The board matches fine and the fets work fine as well. The tx is good too as I have matched it with my other cars to check it out.
One of the fets seems iffy, and I would swap it out if I had the skills. I have a few (quite a few lol ) extra sp8m4s that I will include.
The wires connected to the pot and servo motor are/were hanging on by threads and the solder work on them is just crap, which for a new board is ridiculous/absurd/explicative/etc...
I don't want to install it in my waiting chassis and have it fall to pieces when driving...
I would only buy it if I had good soldering skills though.
Thanks for the interest.
I knew there'd be some after I already went to the po lol.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»