Hi Kevin, I had a question. It looks like you have a washer under the top bar that the upper A arm attaches to? Are you having a traction rolling issue? Thanks
Hi Mike, that's a good eye you have their. The washers are their to bring the bar back up to the stock height. I was experimenting with different roll centres on the old PN double A arm system and had milled down the top plastic cover to get more adjustment range. The new system,which you see on my car, does not have separate upper and lower towers like the old system, therefore the upper and lower arms are a fixed distance away from each other and the roll centre can no longer be changed. So I simply returned the upper tower to the original height using the washers.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»