Which controller are you using? If you using the new KO Eurus with the RF902 module, then for sure, get the RA-22 board. If you're not, the RA-18 board is fine. If you do install this the RA-22 into a MR-02/15, you'll have to change up the servo motor to the original one (cored, i.e. not coreless).
The difference is that the RA-22 board and it's corresponding transmitter module are faster than the RA-18/KT-18/RF901 module and that you're able to program the reverse delay and use a gyro. The RA-18 board has a inheritant delay between brake and reverse.
Ask me for more details tomorrow at the shop when you come to practice. BTW, I have both boards in stock.
__________________
Mini-Car Club of Canada (MC3)
Premier Mini-Z Race Track & dNaNo Sales in Toronto, ON Canada www minicarclubofcanada com
Thanks Shawn. I did notice the servo motors were different but didn't realize about the delay. I'm using a KT-18 and since it's going in a MR-015 which will only be used around the house and not for any racing, i guess the RA-18 will be fine.
does anyone know when the change from reverse delay RA-18 to RA-22 chassis set was done? looking at purchasing a 599xx chassis set for my son but don't want to bother with the 2.4 board with reverse delay as he will be using reverse a lot.
does anyone know when the change from reverse delay RA-18 to RA-22 chassis set was done? looking at purchasing a 599xx chassis set for my son but don't want to bother with the 2.4 board with reverse delay as he will be using reverse a lot.
I can say that all the mr-02ex boards are programmable just like the mr-03. And if you don't have the cable, I can set it up for you with the lowest reverse delay settings as well as the wide throttle neutral setting. (Hin't hint, I have an mr-02ex chassis for sale and have 599xx bodies as well)
does anyone know when the change from reverse delay RA-18 to RA-22 chassis set was done? looking at purchasing a 599xx chassis set for my son but don't want to bother with the 2.4 board with reverse delay as he will be using reverse a lot.
I bought the USB ICS cable and can bring it with me next weekend if you want me to program it.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»