ADVANCED users:
i have discovered that if you completely remove the factory tower bars and only use the MantisWorx bars you can use the PN MR03 lowdown springs and have a better selection of springs. only thing required is a thin flat washer on top of the knuckle between the spring and thats it.
I did this and I used the shortest aluminium downstop for an mr02 that I had in the box and put that closest to the knuckle and it did the trick and it added downstop to the front suspension. I took a picture of the installed knuckle with the red alu downstop and a PN short Mr02 spring.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»