any chance to get aluminum spacers with long counter sunk screws that attach the nose cone to the front wing? i don't have this yet but it just looks like that attachment would provide so much more rigidity. i'm not the cleanest driver with f1 and i do not relish the thought of breaking a $40 wing quickly or does this only make impact stress worse for the v2?
Arch, I have seen both the v1 and v2 take more abuse than you can dish. The single screw mount has proven to be very sturdy, much more than I had originally anticipated.
__________________
EMUracing Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
any chance to get aluminum spacers with long counter sunk screws that attach the nose cone to the front wing? i don't have this yet but it just looks like that attachment would provide so much more rigidity. i'm not the cleanest driver with f1 and i do not relish the thought of breaking a $40 wing quickly or does this only make impact stress worse for the v2?
its not needed, i have only seen one failure and it was only because the screws on the bottom were too short ( and he was hit HARD and at full speed!!). that has been taken care of. the wing does not move as long as you keep a barge board on the car (stock or mantis). it does not flex either so attaching it to the front nose wouldnt do anything except add cost to the wing!!
__________________
MantisWorx www.rcshox.com
professional RC products
I see what I need is FRONT WING VERSION 2 (Assembled) but it is back ordered.
Since picture shown as Renault Yellow, Can it be order to color desire like Silver to match my Vodafone Mclaren or I have to paint it myself?
Of course I assume there is no such matching decals available.
Do your retain the stock nose piece and cut off stock front wing and then install V2?
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R
***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»