Hi,
I have finally completed the project with my very limited spare time. Below is the final recipe for my GPM Mini-T, including electronics. I have refined the look of the chassis using some non-GPM parts such that the car is only silver and black (except the electronics). A photo is attached.
GPM Parts
Graphite Front + Rear Lower Arm Lock Mount Plate 2 Pieces GSMT009
Graphite Main Chassis 1 Set GSMT1016FS/B
Alloy Front Bumper Large Size (80mm Wide) 1 Piece SMT003F/L
Alloy Rear Motor Guard Protector 1 Piece SMT003R
Alloy Front Lower Pivot Block Set 1 Piece SMT008
Alloy Rear Lower Pivot Block Set 1 Piece SMT010
Alloy Front Upper Cap For Steering 1 Piece SMT012A
Alloy Front Lower Brace For Steering 1 Piece SMT012B
Alloy Rear Gear Box 1 Pair SMT013
Alloy Servo Upper Kick Plate 1 Piece SMT014
Alloy Main Gear Adapter 2 Pieces SMT015
Alloy Motor Heat Sink Plate 1 Piece SMT018
Alloy Front Steering C-Hub With Steel Pins 1 Pair SMT019
Alloy Front Knuckle Arm + Titanium Wheel Shaft 1 Pair SMT021/T
Alloy Rear Hub 1 Pair SMT022
Alloy Front Damper Plate 1 Piece SMT028
Alloy Rear Damper Mount 1 Set SMT030
Alloy Front Steering Assembly 3 Pieces With Graphite Plate 1 Set SMT048
Alloy Front Lower Arm 1 Pair SMT055
Alloy Rear Lower Arm 1 Pair SMT056
Alloy Front Body Post 1 Pair SMT201F
Alloy Front Adjustable Spring Damper (55mm) 1 Pair SMT355
Alloy Rear Adjustable Spring Damper (60mm) 1 Pair SMT360
Titanium Motor Gear (13,14,15T) with Hex Wrench 1 Set TSMT0131415T
Titanium Main Gear (61T) 1 Piece TSMT061T
Titanium Complete Hinge Pins 5 Pairs TSMT101
Titanium Rear Universal Swing Shaft (42mm) 1 Pair TSMT242
Titanium + Delrin Ball Differential With Bearing 1 Set TDSMT100A/II
Bearing Full Set (4X8X3) 8 Pieces SMTBEARING
Team Losi Parts
Camber and Steering Link Set LOSB1031
Wheel Nuts & Drive Pins LOSB1045
Rod End Set (14) LOSB1049
Transmission Ball Bearing Set (7) LOSB1060
Transmission Shaft Set LOSB1062
Differential Gear Bag LOSB1066
Slipper Hardware Set LOSB1064
Dual Disk Slipper Conversion Kit: Mini-T LOSB1131
Titan Turnbuckle Set (6): Mini-T LOSB1230
Wheels and Tires
RPM "Spider" 1/18th Scale Truck Wheels Front for the Losi Mini-T Chrome 73203
RPM "Spider" 1/18th Scale Truck Wheels Rear for the Losi Mini-T Chrome 73223
2 X Pro-line Dirt Hawg 1:18 Tire (Fits 1:18 Front or Rear Wheel) 1116-00
Electronics
Hitec Might Micro Servo (Ball Bearing, Metal Gear) (Fut-J) HS-85MG
HPI Racing Micro Servo Saver Set (Micro RS4) 73435
Novak Spy Micro Reversible ESC
Dynamite 1900mAh 7.4V LiPo for Mini-T DYN1421
Peak Racing Raider Mini-T Modified Motor PEK1406
2 X Deans Micro Plug 2NB 1225
Futaba Megatech 3PM-FM Transmitter (76) (75.710 MHz)
Miscellaneous
Dubro Racing Antenna Tube with Cap (Black) 2340
BRP Mini-T Mini Heavy Hitter body clips
Trinity Mini-T Front Spring Set (Soft, Medium, Hard) TRI34068
Trinity Mini-T Rear Spring Set (Soft, Medium, Hard) TRI34069
4 X Lunsford Mini-T Titanium Ball Studs 7181
Lunsford Mini-T Differential Cover & Fat Boy Motor Screw Kit 7949
For the motor, I've in fact bought the Castle Creations brushless system for the car. The green motor looks awesome by itself, but does not match the colour of the chassis so I finally decided to use the Peak Racing motor instead. It's slower but is good enough for my need (running indoor in a small living room).
I am now looking for a custom painted body to fit the car to really finish the project.
Thanks for looking