I'm waiting on the radio to confirm this. Found the information on rctech.net. according to futaba there frequency is fhss and that's the same as the AMZ radio.
I found that same thread on RCtech the guy came back and edited the thread saying it won't work.
I am a GoGoLap dealer and will be placing an order shortly as I'm out of the amazing lightweight Nissan JGTC body that they make. I know that Philip from PN is also a dealer, so he may order too, who knows? Maybe. Anyway, Canadian dollar is sucking still, so all Americans when they buy from me are getting a 10% discount minimum just by being able to buy in USD and converting to CDN.
PN most likely will not carry it if you can understand the politics what product this is going into.
I think you have better chance for us in US ordering from rather then overseas since only carrier available so far is in Europe from my research.
__________________
MRX Mclaren MP-12CGT3 PN 43T LIPO: X2
MR-03 Mclaren MP-12CGT3 AT70T
PN 2.5 Mclaren MP-12CGT3 PN50T
MR-03 S2K Narrow AT60T Nihm
MR-03 BRZ Narrow PN70T Nihm
MR-03 Enzo Ferrari GT Concept Xspeed SP2012
MR-03VE 2005 NSXGT AT 12000KV w/Lipo
MR-02 Nissan R390 GT Lemans 39T PN
AMZ Benz TC 8500KV
X Power IDT Ultra 5600KV Audi
X Power IMT Ultra 6800KV M3
MB-010 FT86 Comic Racer 39T PN
MF-015 Mclaren MP4-25 50T w/Lipo PN
MR-01 Mugen NSX-GT 02 X Speed Retired
dNaNo FX-101MM T2 XANAVI NISMO GT-R
***************************************
MAJ'S HOBBY SHOP " A Place To Escape from Reality"! TD
214 State St. Suite 209
Hackensack, NJ 07601. 201-820-1347
LIVE Mini-Z RACING EVERY Fri at 7 PM.
Outdoor Saturday On Road Racing 1/8GTVE,1/10TC&USGT
never liked stock tx myself so went about swap over..
I also suffered (not as bad now) roll into corner at fast speed, have changed a few things:
-1 front toe linkage
med-firm front springs
med-soft rear springs
alloy shock towers (old pic now has pair)
digital servo (stock is pants)
Anybody notice this car while having same amount of L-R steering throw will turn real hard to the left compare to the right?
The car is biased toward the left side of the car because of the servo and motor outweighing the stock battery. We were originally mitigating this by moving the electronics to on top of the battery, but are now trying a larger battery to help balance the car in addition to gaining a lot of bottom end punch.
I successfully installed a Kyosho board on my AMZ. It was very straight forward actually. I just opened up the servo and mirrored the Kyosho setup. The rear wheelbase adjustment screw holes match up perfectly with the holes in the board that normally sit in pegs to locate it on the Kyosho chassis. I used machine screws and plastic wheel lugs to space the board above the carbon and bolt it down. I'm using Kyosho LiFe batteries stacked on top of each other. It should help the weight balance.
I successfully installed a Kyosho board on my AMZ. It was very straight forward actually. I just opened up the servo and mirrored the Kyosho setup. The rear wheelbase adjustment screw holes match up perfectly with the holes in the board that normally sit in pegs to locate it on the Kyosho chassis. I used machine screws and plastic wheel lugs to space the board above the carbon and bolt it down. I'm using Kyosho LiFe batteries stacked on top of each other. It should help the weight balance.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»