It has been brought to my attention that when using the 2.4GHz module you must have the following settings in your Tx.
1. Steering Travel Max 70
2. Steering Balance Max 70%
3. Throttle High Point Max 60
4. Throttle Brake Max 60
5. Quick ST & TH in the EX-1 UR cannot be used.
Setting your Tx above the max settings may cause the vehicle to operate incorrectly.
For example, recently we have ad a few customers say their car will not go into reverse. If the throttle settings are not set to the above settings, yes it will not go into reverse because the max endpoint settings for the ESC will get goofed-up. Some modules may get away with it, but most will not operate correctly.
Please check your settings. I have found that with the above settings, the cars do respond better.
Thank you KO for posting this info. It appears to have resolved my "signal loss" and "glitching" problems I've been having (For now, let's hope it's permanent. )
If any other developments arise concerning the use of the RF901-SM 2.4ghz module for Mini-Z when used with the EX-10 Helios or the EX-1UR I would very much appreciate any and all updates.
Thanks again for your help!
- Lawrence
Hi, THANK YOU KO for the above... Currently my settings are all to the max!!! I thought if all is max, then my car will be also maxed out.
Yet to try out your recommendations... By the way, your recommendations are they relevant to all KO TX all around your productions? What i mean is different batches of electronics will differ slightly, so your recommendations are they fit for all KO TX???
Hi, THANK YOU KO for the above... Currently my settings are all to the max!!! I thought if all is max, then my car will be also maxed out.
Yet to try out your recommendations... By the way, your recommendations are they relevant to all KO TX all around your productions? What i mean is different batches of electronics will differ slightly, so your recommendations are they fit for all KO TX???
The settings listed are for all KO Tx's that you want to use with the 2.4GHz Mini-Z.
It has been brought to my attention that when using the 2.4GHz module you must have the following settings in your Tx.
1. Steering Travel Max 70
2. Steering Balance Max 70%
3. Throttle High Point Max 60
4. Throttle Brake Max 60
5. Quick ST & TH in the EX-1 UR cannot be used.
Setting your Tx above the max settings may cause the vehicle to operate incorrectly.
For example, recently we have ad a few customers say their car will not go into reverse. If the throttle settings are not set to the above settings, yes it will not go into reverse because the max endpoint settings for the ESC will get goofed-up. Some modules may get away with it, but most will not operate correctly.
Please check your settings. I have found that with the above settings, the cars do respond better.
All my 2.4 mini Zs works far more better now. Can go reverse like normal AM board mini Z.
__________________
Mini Z AWD 2.4 Ghz
Mini Z F1 2.4Ghz
Mini Z Monster 2.4 Ghz
hi i've notice that everywhere has no stock on the rf 901sm module and ko has recently produce the new rf 902sm module. can this rf 902sm module work with the older tx eg. ex1 or ex1ur?
hi i've notice that everywhere has no stock on the rf 901sm module and ko has recently produce the new rf 902sm module. can this rf 902sm module work with the older tx eg. ex1 or ex1ur?
The 901SM module has been out of stock for a while. They should be in stock once again by next week.
The 902SM will only work with the new EX-10 eurus.
so that means those other tx eg. m11 or 3pk wont be able to use the rf 902sm as well? cause the previous modules work on those tx with the usage of the pn converter
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»