i wanted to lower my OL... but I didn't want to buy another set of shocks... so i was looking at the low rider shocks, and it seems the only thing different about them was that the screw shaft was shorter....
so here it is...
picture 1 and 2 are of supplies needed, 1 screw driver, 1 plastic coffee stirring straw, and a razor blade...
cut the plastic straw to desired lenght of lowering.... carefully cut four pieces of equal length... or you can leave the rears stock or a little bigger if you want a forward slammed look...
then take apart a stock shock... insert screw into plastic tube piece, and reasemble
it should now be shorter than a stock shock...
check out the picts its all pretty straight forward...
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»