Hey guys just need some advice on setup of the gimbal mount.
Ok I will try and explain as best I can.
I currently am running foam tires on the rear but am having traction issues exiting corners, pretty much as soon as I'm through the corner if I lay down a fraction too much throttle I spin out. I have slight push entering the corners which I like, but loose that traction as soon as the power comes back down, loosening the balldiff helps but drastically impairs my torque, so a few questions.
1- Should I stiffen or soften the top shock main spring for more traction.
2- Should I stiffen or soften the side springs for more traction.
3- I removed the Damper plates as I didn't like the action of them should I reinstall and if so heavier or softer top spring on the damper plates.
I currrently run the MR-03 with PN front end, 1deg camber, 1deg Caster, lowdown knuckles with a relatively low ride height and purple springs, no droop or preload, Gimbald mount with PN 33turn motor (have just swaped to the AWD XSpeed as I had one spare) red spring on top shock and AWD springs on side shocks, Foams on rear and Rubbers on front (foam fronts were way to much and made the spinout problem worse) and the mosler body. any info would be grand.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»