Other:
-Blue/gray chassis
-ATM USA motor + 3racing spacers A2/B2
-F430GT body w/ rear cut out
-Kyosho ti driveshaft + metal pinion
-Bearing set
-ATM ti screws
-PN Center Bearing Holder
-PN front clip (f430gt) and mount
Spare parts included:
-Glidex bearing oil
-15K Kyosho grease
- 2.4ghz board: 2x2 4562 fets, new antenna/batt wires, no switch(hardwired), no ics plug(flip board to program)
-2 kyosho 1.5* knuckles
-3racing A3/B3 spacers
-PN 17t and 21t pinions
-Stock, -1, -2 (2 pcs) tierods
-PN Racing orange motor cover
-Atomic A2/B2
-94mm spurs: 27,31
-90mm spurs: 27,29,31
-NEW 3racing 98mm extension
-SAS excellent cond. 0* arms and knuckle (pn a-arm springs installed)
-Atomic ssg front cover
-3racing 1* knuckles
-2 tierod (2)
-rear toebar from kyosho
-Slick7 comm drops, a few battery cases, oil and the spoiler..
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»