Once in a while, my throttle sticks on my f1 mini-z. Sometimes the throttle is a little jumpy or inconsistent. I have not been able to really run it at full throttle because I have been using it indoors in a small space, so now major crashes I have tried to trim the throttle on the controller, but that does not seem to work. Any suggestions or feedback?
Draconious, it seems to stick on most of the time, but a little of both. I am new at this, so can you interpret what TX and throttle pot means and what a bad FET is? thanks.
the throttle pot, is basically a sensor probably somewhere near the trigger in your transmitter, the pot would be inside the tx. sorry i dont know what it looks like
a bad fet, can mean many things, it can mean that it is fried, then you will need to send your board away to someone like drac and get it replaced, if you do have a bad fet, you will have to get it replaced......
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»