I had a 599xx, and after he installed that damper we found out the whole car chassis was too low. The body and tire would rub each other.
I don't know how the owner did, he changed the damper setting and my car was fine then,
today I was changing my body from 599xx to LaFerrari. I felt that I've got the same problem again. when the car was running, the car body kept shaking,
is there anything I can do?
I never had this problem before when I changing the body one to another. But now seems the damper is a big object in my chassis.
Do you think you can post a couple photos of how the whole assembly goes together?
If there might be a way too shim either the damper or the T plate to make it function properly then try that first before purchasing something different
__________________
I wonder what rocket scientists say to their coworkers when one of them doesn't get it?
If it is (and the plate is too far away from the motor mount (therfore pulling the mount/t plate out of alignment) try removing it and flipping the shock mount part over the top of the damper plate. That will lower the plate and disk s closet to the damper post.
__________________
I wonder what rocket scientists say to their coworkers when one of them doesn't get it?
Do you think you can post a couple photos of how the whole assembly goes together?
If there might be a way too shim either the damper or the T plate to make it function properly then try that first before purchasing something different
On the reply page there isa yellow square with a landscape in it that represents post a photo. If you copy the photo link from flikr page you can insert/paste it the pop up.
As for your chassis, it's hard to tell exactly the issue.
When the damper is installed does it bend the t plate upwards?
My suggestion is to take the top damper parts off and have the T plate sit straight. Investigate what kind of space you need to adjust.
1.You can try installing the damper plate before the top shock plate.
2. You could also try shimming the damper spring post so it sits higher
It'd be great to seea close up photo of the chassis from a side view sitting on a flat surface.
__________________
I wonder what rocket scientists say to their coworkers when one of them doesn't get it?
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»