MC3 Fine Adjustment Motor Mount Ball Bearing adaptor Kit
This is a high strength 3D printed kit. The material is nylon and printed using SLS technology, meaning high precision. It's akin to commercial plastic injection molded parts.
This set is only compatible with PN Racing brand motor mounts.
If you ever wanted finer adjustment of your axle height, then the answer is our new MC3 Fine Adjustment Motor Mount Ball Bearing adapter kit.
Our kit pieces feature graduations of 0.22mm adjustments whereas stock adapters only offer minimum 0.55mm adjustments. Our kit offers 8 possible positions compared to the stock 4 positions. Please refer to the diagram attached below.
Also, our kit comes coloured meaning you don't have to read the number on the side of the adapter to know what your axle height is. You can now tell with one quick look.
These adapters are tight fitting, as such they eliminate play in the rear axle compared to the stock adapters.
We recommend using a bearing testing tool, like those made by Atomic R/C (part #Y--142) in order to seat the bearing into the adapter squarely.
You get 2 pairs of each colour.
0 = yellow
1 = blue
2 = orange
3 = red
__________________
Mini-Car Club of Canada (MC3)
Premier Mini-Z Race Track & dNaNo Sales in Toronto, ON Canada www minicarclubofcanada com
Last edited by Sinister_Y; 2016.03.08 at 09:55 AM.
Reason: pictures too big; need to resize; will add later along with install writeup
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»