Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2005.12.26, 01:02 PM   #1
AtlRC
AMSR Coordinator
 
AtlRC's Avatar
 
Join Date: May 2005
Location: Alpharetta, Georgia
Posts: 541
Atlanta Mini Scale Racing Announcement

Mini scale racing has begun in the Atlanta Georgia area!

We are racing 1/28th scale (Mini-Z, I-Waver, X-Mods) and 1/18th scale. I have a custom built track and a Core lap counting system. We will be racing in my basement in Alpharetta (North Atlanta).

Track:

Currently the track dimensions are approx 20' X 12' and the lane width is 3'. The track and rails are made of EVA foam anti fatigue mats, and seem to offer good traction with the right tires. The track features rumble strips (the red and white borders around the corners) and grassy areas. I also have a TV hooked up to display race stats. If we can generate enough interest, I will eventually find an alternate location to race, and expand the track to up 30 to 40 feet by 15 to 20 (depending upon the available space).

Schedule:

I am planning on our next GTG on Saturday, Jan 7th. Door opens at 12:00 and racing starting at 3:00. Tentatively then, we will plan on running every other Sunday thereafter (and possible exchanging some Sundays with Saturdays). As we begin racing, we could always discuss a schedule that would be more accommodating for the majority of the racers... like possibly week nights. Also up for popular vote will be the race times.

Classes:

Initially, I'd like to start with only 3 classes; Novice and Open for 1/28th and Open for 1/18th. I want to have a novice class so that new and "novice" level drivers do not feel intimidated by the veterans. It will be recommended that this class be restricted to stock motors. However, exceptions may be made on a case by case basis; for example, a generation 1 X-Mod upgraded to a "mod" motor just so that it could keep up with a stock Mini-Z would be acceptable. This class is important for the growth of our hobby, so we want to try to keep it fun for the participants. I'm sure we'll modify our classes and rules as necessary as we continue to grow.

We had our first GTG Sunday, Dec 11th, and the turnout was pretty good for our first. We had 5 1/28th scales, and 4 1/18th's. The track's current lane width of 3 feet is pretty tight for 1/18ths, but I thought it was still fun. We ran some impromptu races with the lap counting system. I wanted to test the system and get a feel for what cars and racers to expect. At our next GTG, I plan on having a more structured event with qualifiers and mains. I'll set a start time and we will try to get through the races in an orderly fashion so people can get back to their regularly scheduled lives (if they want to that is). Or they can stay and play for a while if they want to!

If you are interested in joining us, please let me know by posting here. If you had been posting on TFB's website about our racing, please post here and let me know that you've found this thread. Unfortunately TFB removed our posts and I want to make sure we don't lose anybody who was interested. I plan on using this forum as the "official" place for us to chat about our racing (for now).

For my contact information and address for racing, click on my profile and e-mail me. I'll reply with the info.

Thanks and if you're in the area, I hope you can join us!
AtlRC is offline   Reply With Quote
Old 2005.12.26, 07:11 PM   #2
Shaun
000-00-0001
 
Shaun's Avatar
 
Join Date: Feb 2002
Location: Rydal, GA
Posts: 695
If you have a 1/28th or 1/18th come on out and have a great time. The CORE lap system gives accurate results and lap times for every race. This is something that allows you to see improvments in performance instantly. Great for beginners tracking their progress or that seasoned racer trying to squeeze an extra tenth off his lap times. A timing system really adds another dimension to racing.

Come on out and race!
__________________
ATLANTA Mini Racing ATOMIC - GPM - Airtronics - Kyosho - Intellect - PN Racing
Shaun is offline   Reply With Quote
Old 2005.12.26, 09:30 PM   #3
bemoore
Rolling Chicane
 
Join Date: Dec 2005
Location: Madison, Alabama
Posts: 239
I'll be there. I was able to make it to the Dec 11 GTG, and had a blast. The track and timing were first rate. I didn't have my own car yet then, but Santa brought me a Mini-Z, and now I'm ready to race my own. Anyone interested in mini RC racing the Atlanta area should come out.
bemoore is offline   Reply With Quote
Old 2005.12.27, 09:34 AM   #4
AtlRC
AMSR Coordinator
 
AtlRC's Avatar
 
Join Date: May 2005
Location: Alpharetta, Georgia
Posts: 541
Glad to hear that you got the Mini-Z bemoore! I'm sure you'll enjoy it. See you on the 7th.

Here are a few current pictures. Our basement is under construction so we hope to finish out the rooms soon. I'll post a few more pictures from our last GTG as soon as I have some time.









AtlRC is offline   Reply With Quote
Old 2005.12.27, 12:02 PM   #5
Lionblade
Honor & a shot of sake.
 
Lionblade's Avatar
 
Join Date: Oct 2004
Location: Staten Island.
Posts: 575
Send a message via AIM to Lionblade Send a message via MSN to Lionblade
Looks like you guys have a cool little spot. Hope it all takes off for you.
Lionblade is offline   Reply With Quote
Old 2005.12.27, 12:36 PM   #6
Allen1
Registered User
 
Join Date: Jun 2005
Posts: 50
Nice track I am about an hour and a half from there i might could make a saturday race.
Allen1 is offline   Reply With Quote
Old 2005.12.27, 12:36 PM   #7
AtlRC
AMSR Coordinator
 
AtlRC's Avatar
 
Join Date: May 2005
Location: Alpharetta, Georgia
Posts: 541
Thanks Lionblade!

Shaun: So far, for the race on the 7th, about 6 1/28th scale drivers have said they will be there; me (Patrick), Wyat (my stepson), Chad, Billy (new Mini-Z), Jay (I think he's getting new Mini-Z), and you. There is another guy Andy who may make it too, he has a hopped up MR-01. I'm working on some others too. Hopefully FordGT40 and his son will be able to make it, but I haven't heard from him since our posts were removed from TFB.

FordGT40: You out there???

Andy: Did you find us here???
AtlRC is offline   Reply With Quote
Old 2005.12.27, 02:47 PM   #8
AtlRC
AMSR Coordinator
 
AtlRC's Avatar
 
Join Date: May 2005
Location: Alpharetta, Georgia
Posts: 541
Quote:
Originally Posted by Allen1
Nice track I am about an hour and a half from there i might could make a saturday race.
Hi Allen1,

We hope you can join us sometime, that would be great! Where you located? What car(s) do you have?

I have a couple of MR-02's. One has a few hop-ups, the other is stock. I also have a completely stock F1 (the one in the picture above). I'd love to have a class for these too! Did you ever get an F1? (I looked through a few of your previous posts ).

I also have an assortment of X-Mods (3 gen-1's and an Evolution)... although I haven't had much success with these as far as getting them rolling well enough to race and be competitive. I'd like to see someone with a good running X-Mod, I have heard they exist
AtlRC is offline   Reply With Quote
Old 2005.12.27, 05:57 PM   #9
TruReaper(Chad)
Registered User
 
Join Date: Jan 2003
Location: Stone mTn, georgia
Posts: 167
Send a message via AIM to TruReaper(Chad) Send a message via Yahoo to TruReaper(Chad)
whats up fellas....im looking forward to coming up on the 7th to race again...had alot of fun last time hopefully some of the parts i ordered will be in by the time i get home from this job in ky so i can put my cars back together so i can race but i hope more show up this time and looking forward to it all once again even if i LOSE again
TruReaper(Chad) is offline   Reply With Quote
Old 2005.12.27, 08:01 PM   #10
Shaun
000-00-0001
 
Shaun's Avatar
 
Join Date: Feb 2002
Location: Rydal, GA
Posts: 695
Chad - what parts are you waiting for? Remember to bring you charger!

atlRC - sounds good.
__________________
ATLANTA Mini Racing ATOMIC - GPM - Airtronics - Kyosho - Intellect - PN Racing
Shaun is offline   Reply With Quote
Old 2005.12.27, 08:52 PM   #11
TruReaper(Chad)
Registered User
 
Join Date: Jan 2003
Location: Stone mTn, georgia
Posts: 167
Send a message via AIM to TruReaper(Chad) Send a message via Yahoo to TruReaper(Chad)
Im waiting for some bearings for my car and 2 flexible ant., front alloy bulkhead and alloy wheels for my full mod mr-01 also where do i order that atomic body at i cant find it
TruReaper(Chad) is offline   Reply With Quote
Old 2005.12.27, 09:55 PM   #12
Shaun
000-00-0001
 
Shaun's Avatar
 
Join Date: Feb 2002
Location: Rydal, GA
Posts: 695
Quote:
Originally Posted by TruReaper(Chad)
Im waiting for some bearings for my car and 2 flexible ant., front alloy bulkhead and alloy wheels for my full mod mr-01 also where do i order that atomic body at i cant find it
Go to RC Mart. Good ol' Hong Kong.

In the Mini-Z section under Mini-Z MR-02 Body

Atomic VDS body for 98mm WB
$21.90 and it comes with white disc wheels.
__________________
ATLANTA Mini Racing ATOMIC - GPM - Airtronics - Kyosho - Intellect - PN Racing
Shaun is offline   Reply With Quote
Old 2005.12.27, 10:35 PM   #13
TruReaper(Chad)
Registered User
 
Join Date: Jan 2003
Location: Stone mTn, georgia
Posts: 167
Send a message via AIM to TruReaper(Chad) Send a message via Yahoo to TruReaper(Chad)
ok cool thanx im about to go get one then
TruReaper(Chad) is offline   Reply With Quote
Old 2005.12.28, 04:57 PM   #14
Allen1
Registered User
 
Join Date: Jun 2005
Posts: 50
Quote:
Originally Posted by AtlRC
Hi Allen1,

We hope you can join us sometime, that would be great! Where you located? What car(s) do you have?

I have a couple of MR-02's. One has a few hop-ups, the other is stock. I also have a completely stock F1 (the one in the picture above). I'd love to have a class for these too! Did you ever get an F1? (I looked through a few of your previous posts ).

I also have an assortment of X-Mods (3 gen-1's and an Evolution)... although I haven't had much success with these as far as getting them rolling well enough to race and be competitive. I'd like to see someone with a good running X-Mod, I have heard they exist
I do have 1 F1, an 01, 02, a couple of overlands I burnt the board on the 02 I will have it repaired shortly I race with several guys on this site in Chattanooga
Allen1 is offline   Reply With Quote
Old 2005.12.28, 05:09 PM   #15
Shaun
000-00-0001
 
Shaun's Avatar
 
Join Date: Feb 2002
Location: Rydal, GA
Posts: 695
Allen, maybe you could bring some of the guys with you one Saturday?

Where are you located at?
__________________
ATLANTA Mini Racing ATOMIC - GPM - Airtronics - Kyosho - Intellect - PN Racing
Shaun is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New Mini Z/Small Scale Track in Central NJ Hotwheels Hobby HotWheels Hobby RC Center, NJ 468 2008.11.18 03:49 PM
Kyosho Mini Z NJ / Mini Z Racing HobbyShopOwner Mini Z Racing, Maj's Hobby Shop, Saddle Brook NJ 0 2008.05.05 12:48 AM
Sat 3/11 10am till 4pm mini scale racing madf1man HIRCR 5 2006.03.14 08:31 AM
Installing 1/10th Scale Electronics in the Mini Z Racer CTRallyRacer Parts and Hop-ups 2 2002.03.04 07:55 AM
Mini Z vs Colt Mini Justin Miscellaneous Discussion 71 2002.01.18 07:31 AM


All times are GMT -5. The time now is 06:17 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts