Got the new "Tiki-Tiki" JSCC Cup MR-03. After 2 mins of running the front servo constantly chatters and is jittery when in any position. Tried binding to a 2nd transmitter and same thing. Any quick fix for this, or should I just try contact cleaner in the steering servo pot? Seems strange that the pot would be dirty right out of the box.
is it affecting and/or restricting any steering movement?
try 'resetting' your tx... a guy i know (with the regular kt18 and mr02 asf) had some steering issues (binding, limited steering throw on one side compared to the other)... he rebinded... and it still happened... i suggested to reset and rebind the kt18 and after that the problems were gone...
don't know if you can reset 3 channel tx's though...
dunno if this is what you're experiencing with yours though...
but if it's just some servo noise coming out in front, it's normal...
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»