reposting some valuable information sourced form members here
To reset the center position of the wheels
(1) Turn on the chassis (leave the transmitter turned off).
(2) Make sure that the steering trim is at the center.
(3) Move the front tires to the center position with your fingers.
(4) Push and hold the pairing button on the chassis until the LED flashes fast two times and goes off.
(5) Turn on the transmitter. The neutral position should be corrected. If it is still not at the center position, repeat above steps.
To reset the transmitter:
(1) Turn off the transmitter if it is on.
(2) Make sure that the steering trim knob is at the center position
(3) Turn the G.SPD L knob fully to the counterclockwise direction.
(4) Position of G.SPD H knob does not matter.
(5) Turn the steering wheel to the fully right position and push the throttle away to the full-brake position and hold them.
(6) Turn on the transmitter. The LED should flash rapidly; this means you are now in the factory mode.
(7) Release the steering wheel and throttle lever.
(8) Turn the steering wheel fully to the left, right, left and right, and then release it.
(9) Pull/push the throttle lever to full-throttle, full-brake, full-throttle, and full-brake, and then release it.
(10) Turn the G.SPD L knob to the right most position. The LED should become solid.
(11) Turn off the transmitter and on it again. You are done.
So I found out today that this radio is a direct replacement for the KT-19. It will work fine for the new sport PC boards. It also has 15 car memory. Comes with a Li-Poly transmitter battery that you charge through a supplied USB cord.
Made by FlySky model FS-GT3C. Amazon has them in stock and it is only $65 shipped to your house with prime.
__________________
DG-Designs / Brooklyn Hobbies
Last edited by Mike Keely; 2015.01.04 at 04:36 PM.
Reason: Price changed
I am not sure about that but I do know that it works on the sport model. My guess is that Kyosho can make the price lower and still have a good profit.
Yesterday we ran across a new issue with the KT-19. The contacts on the battery holder will loosen causing an intermittent connection between the holder and the radio which shuts the radio down. The resulting fumbling that occurs will change the radio settings. Once this happens its time to do the hokey-pokey to get back to square one. It would be wise to check all the KT-1 battery holders for this condition and to instruct users(especially new ones) not to arbitrarily be stabbing and steering the transmitter whether the car is on or not.
Is the KT-19 included in the Sports series readysets exactly the same as the KT-19 included with the Moto Racer readyset?
I do not own a KT-19, but I have a MA-010 converted with a Sports series board, and I successfully bound it to a FS-TM002 module on an EX-1UR.
Thinking that the KT-19 radios are all the same, I purchased a MC-01 chassis set (without transmitter), and I'm unable to pair my module with the bike. Is the bike not actually running on FlySky?
edit: nevermind, it works!
Last edited by gctkaz; 2015.12.04 at 12:29 AM.
Reason: nevermind
Hi Guys,
I got an MR-03s ready set last year and it came with a KT-19 transmitter. I have also bought an MA-020 chassis set and GT-R autoscale so I can use my new AWD chasis.
I have tried and tried to bind the MA-020 to the KT-19 transmitter but it won't work.
Kyosho's main website said it should work but the manual that came with the AWD said I need the KT-18.....
look closely... Kyosho's webpage for the MA-020 describes it as (ASF) system and shows you the two recommended transmitters at the bottom vs. a webpage for the awd sports series (FHS)webpage which shows the KT-19 only.
ASF=ASF only equipment
FHS=FHS only equipment
MHS=ASF and MHS equipment. MHS features only accessible to MHS car and HMS radio. by default will run in ASF mode.
Not sure if it's a known thing, but today I was wondering what the usb port was for.. and since it has the text "CHG" next to it I thought it might be for charging it or maybe something else, so out of curiosity I put my iPhone charge cable in it and connected my phone.. and it started charging my phone So I guess that's one way of using it
__________________
MF010 BMW F1 - MR02 Megane Trophy - MB010 Comic Racer Subaru WRX - MB010 Inferno MP9 TKI3
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»