I'm not liking the HPI chassis at all...and I was looking to upgrade...any idea as to what I should get? the new Ratzas seems the most to my liking right now but I was wondering what every one else has or likes.
I'm not liking the HPI chassis at all...and I was looking to upgrade...any idea as to what I should get? the new Ratzas seems the most to my liking right now but I was wondering what every one else has or likes.
Answers can also be found on MZR's sister site YourMicro.com
It's pointless opening another Micro RS4 discussion on MZR when this subject has already been covered in depth and there's a sister site dedicated to Micro scale RC
Yeah well that thread's last post is pushing two years old and I'm not a member of yourmicro.com so I can't post and participate (and I am comfortable with the people here anyways)...so...if anyone has input instead of flames it would be greatly appreciated.
I have two Micro RS4s running, one under contruction and a (Brushless) XRay M18.
Penguin Chassis
By far the most preferred chassis of YourMicro.com members
Brion Sohn of Penguin RC has to be one of the nicest guys in RC. He always adds input to Memebers' Threads and listens to what Members demand from a chassis
The Penguin P3500 series chassis are carbon and they use a roll plate rear suspension geometry. Various roll plates are available in soft, medium and hard.
They can be configured to 140mm or 150mm wheelbase
The P3500LM is a pan chassis. I use one on Micro #1 with the P3501VM (vertical servo mount) upper deck.
The P3500 is the narrow version. The 3500s come with VCS rear shock compatible rear decks.
The new(ish) P3500el is the entry level G10 fibre glass version with a non adjustable rear end. Very popular and progressive for its price.
It is sold as a base chassis and the upper/rear decks are sold seperately
All 3500 series chassis support the optional centre battery plate and servo mount made by Penguin RC. (I use the battery mounts on both Micros #1 and #2 and the servo mount on Micro #1)
The P3500LM and P3500el support Penguin's saddle pack configuration and bullet configuration
ARM Pan Chassis
Unfortunately ARm have closed but they manufactured the ARM Pan which is a fibre glass 150mm only chassis. This was a very popular chassis with YourMicro Members and offered fantastic performance for $15.
My still incomplete Micro #3 uses one. I had mine drilled and countersunk to support 140/150mm wheelbase
The ARM was just a base Pan chassis, no upper/rear decks included
IPD 140 Chassis
This is also discontinued but very popular and hard to find. It is a CF 140mm only pan chassis as a full lower/upper/rear deck set
If you are lucky enough to find one for sale you'll pay a premium for it, they still don't come cheap, even second hand.
Ratzas
When I first joined YourMicro the Ratzas was quite popular but a few Members reported that the rear suspension plate (where the motor pod lives) was breaking under race conditions.
Ratzas played this down to misuse and bad driving
When the Ratzas Extreme (tweakable) was released it was by far the most progressive Micro chassis money could buy.. until the Penguin chassis waddled on to the Micro scene.
We rarely ever hear from Ratzas on YourMicro and they are not as popular as they used to be.
Team Orion CF Chassis
140 or 150mm narrow carbon chassis. I owned one. Avoid it..
Lastly, the M18. The composite plastic chassis left a lot to be desired for Brushless applicatrions. I like the M18, it's great. Mine consists of 85% hop ups.
Out of the box the M18 is a more progressive and modern design than the Micro RS4. It has independant suspension all round and a shaft drive.
There are limitations to the design like battery/electronics placement etc..
however in the right hands a good Micro RS4 is more than capable of winning in a race as the 2004 SoCal Micro Class results clearly demonstrated
Some photos are attached for reference purposes. All the cars in photos are mine excluding the IPD chassis which was borrowed from a YourMicro Thread
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»