Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2010.05.13, 07:44 PM   #1
Mike Keely
Registered User
 
Join Date: Sep 2008
Posts: 1,202
Kyosho Stock Class

DRAFT COPY - Schedule Under Construction


Box Stock Rules

1) Only LM bodies with their stock wing and no mods. If the wings crack or are broken they may be repaired back to the way the body came stock
2) Any bearings allowed
3) Only LM front rims and tires
4) Any manufacturers rear rims as long as they are the same diameter and offset as the stock LM rim for the body that they are running
5) Only Stock PC boards with 3010 fets and no stacking of fets
6) Only LM rear tires
7) No lightening of the chassis or body but weight may be added
8) Only our spec motor with a Kyosho 6 tooth pinion
9) Only 4 NIMH batteries allowed
10) Metal 4th gear in the servo is allowed
11) Any T-Bar is allowed as long as it keeps the car with the stock wheelbase.
12) Stock front end with the Kyosho black stock springs
13) Any motor wires allowed but the stock wire must be used between the batteries
14) Stock switch must be used
15) Any oils or lubes may be used as the driver sees fit for handling or performance
16) No oil filled top shocks
17) These rules are subject to change as the club feels fit. All changes need to be voted on and the majority vote will then be accepted. Any rule changes must be agreed upon before any qualifying runs have been ran for that day or they will be accepted as a new rule the next race day.
18) All cars must be inspected before the qualifiers start
19) Metal rear pods are legal but the ride height adjusters must be so the axle is kept in the middle of the adjustment range or as close to stock height as possible.
20) Any protests will need to be submitted to Gary or Mike within 10 minutes of the mains being completed. $10 will need to be submitted with the protest and the item that they feel is illegal. Gary and Mike’s findings are final. If Gary’s and Mike’s decision oppose each other than Reggie will have the final tie breaking vote. If the item is found to be illegal the protester will keep their $10 and the owner of the illegal car will lose their points and position for that night. If the item is found to be legal then the owner of the protested car gets to keep the $10.

Last edited by Mike Keely; 2014.03.05 at 06:50 PM. Reason: Rule changes
Mike Keely is offline   Reply With Quote
Old 2012.12.30, 07:49 PM   #2
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 32,892
Send a message via AIM to arch2b
Stock parts info for LM

Quote:
:MZ301, MZ 302, MZ403 Those are the Dif, motor pod and small parts pkg's. There is a package, MZ304(motor case conversion from MM to LM with dif included. The wheels are MZH302RE(Mazda/Nissan) MZH301FA(962KH) and MZH303SM(Sauber)
arch2b is offline   Reply With Quote
Old 2014.03.05, 06:52 PM   #3
Mike Keely
Registered User
 
Join Date: Sep 2008
Posts: 1,202
I have updated the rules for our races We race Box Stock on Thursday nights.
__________________
DG-Designs / Brooklyn Hobbies
Mike Keely is offline   Reply With Quote
Old 2014.03.05, 07:59 PM   #4
imxlr8ed
Registered User
 
imxlr8ed's Avatar
 
Join Date: Sep 2004
Location: Reading Pa.
Posts: 4,121
One of the coolest sets of rules I've ever seen for a stock class. Very
do-able! Really like the protest part too! You guys are getting serious!
I can't wait until we get more racers up here so we can build a Spec class as well, for now though we gotta keep it fairly open for the newbs.
__________________
My Online Design Studio and Shop!

http://www.shapeways.com/shops/UID

http://www.howfastareyou.com

SUPPORT LBR!!!
(Local Basement Racing)
imxlr8ed is offline   Reply With Quote
Old 2014.03.05, 11:56 PM   #5
lfisminiz
MINI-Z BODY NUT
 
lfisminiz's Avatar
 
Join Date: Mar 2003
Location: pa.
Posts: 5,027
Nice to see people running LM cars. Can't wait for the new Toyota.
__________________
MINI-Z BODY NUT





DG DESIGNS - PN RACING - MANTISWORX
lfisminiz is offline   Reply With Quote
Old 2014.03.06, 07:11 AM   #6
Mike Keely
Registered User
 
Join Date: Sep 2008
Posts: 1,202
Yeah, we are looking for it too!!!
__________________
DG-Designs / Brooklyn Hobbies
Mike Keely is offline   Reply With Quote
Old 2014.03.06, 09:45 AM   #7
poochy
Registered User
 
Join Date: Dec 2008
Posts: 67
thanks Mike for updating the rules,
sejin and i wont make it tonight bc our Lm cars has not come in

i have a question about the below rule-just wondering why we want this rule? wouldn't the better rule be "only stock wiring is allowed, no modifications what so ever"

"13) Any motor wires allowed but the stock wire must be used between the batteries"
poochy is offline   Reply With Quote
Old 2014.03.06, 10:24 AM   #8
imxlr8ed
Registered User
 
imxlr8ed's Avatar
 
Join Date: Sep 2004
Location: Reading Pa.
Posts: 4,121
The stock cross wire is the restrictor plate for all that fuel.
__________________
My Online Design Studio and Shop!

http://www.shapeways.com/shops/UID

http://www.howfastareyou.com

SUPPORT LBR!!!
(Local Basement Racing)
imxlr8ed is offline   Reply With Quote
Old 2014.03.06, 07:16 PM   #9
arch2b
Moderator
 
arch2b's Avatar
 
Join Date: Sep 2002
Location: Washington, DC
Posts: 32,892
Send a message via AIM to arch2b
Quote:
Originally Posted by poochy View Post
thanks Mike for updating the rules,
sejin and i wont make it tonight bc our Lm cars has not come in...
wish i had known, i have extra porsche 926 autoscales. still have 3.
arch2b is offline   Reply With Quote
Old 2014.03.07, 08:31 AM   #10
Mike Keely
Registered User
 
Join Date: Sep 2008
Posts: 1,202
Quote:
Originally Posted by poochy View Post
thanks Mike for updating the rules,
sejin and i wont make it tonight bc our Lm cars has not come in

i have a question about the below rule-just wondering why we want this rule? wouldn't the better rule be "only stock wiring is allowed, no modifications what so ever"

"13) Any motor wires allowed but the stock wire must be used between the batteries"
The stock wires that come with the PN motors are a little bit more flexible and the stock motor wire gets pretty hard after a while. The reason I kept the wire between the batteries is to make this the restrictor that will keep us all at the same speed. Everyone has to buy the PN motor and it comes on the motor so no one is needing to buy anything extra that they do not already have.

You could put 12 gauge wire everywhere and keep that same wire between the batteries and the 12 gauge wire and a stock car will still have the same power. That is the reason.
__________________
DG-Designs / Brooklyn Hobbies
Mike Keely is offline   Reply With Quote
Old 2015.01.29, 02:06 PM   #11
poochy
Registered User
 
Join Date: Dec 2008
Posts: 67
is this class still being raced on thursdays?
the big class still?
poochy is offline   Reply With Quote
Old 2015.01.29, 02:40 PM   #12
Mike Keely
Registered User
 
Join Date: Sep 2008
Posts: 1,202
Quote:
Originally Posted by poochy View Post
is this class still being raced on thursdays?
the big class still?
Yes, we will be there today at 5. Hope you can make it. The only change has been that we are using a 9 tooth pinion now.
__________________
DG-Designs / Brooklyn Hobbies
Mike Keely is offline   Reply With Quote
Old 2015.01.29, 10:02 PM   #13
poochy
Registered User
 
Join Date: Dec 2008
Posts: 67
thanks Mike. ill try to come out nxt thur.
poochy is offline   Reply With Quote
Old 2015.01.30, 06:51 PM   #14
herman
Registered User
 
Join Date: Nov 2001
Location: makati, philippines
Posts: 8,507
Question: would relocating the body posts clips be allowed?

i ask this because, i did this to all of my lm bodies... if you have noticed, most of the lm bodies that come from kyosho have a really high tire to fender clearance especially in the rear (i usually cringe at the site of these things)... and the only remedy (for me) to make them look decent, was to relocate the body clips a few 2-3 mm up from their original position...

check out the pics of what i did in this thread ---> click here

here's a before pic...


and after...


hmm... Can't seem to paste pics under images anymore... Is there a reason for this? Anyway just click on the link...

Last edited by herman; 2015.01.30 at 07:15 PM.
herman is offline   Reply With Quote
Old 2015.01.30, 08:45 PM   #15
KWT
Registered User
 
Join Date: Oct 2002
Posts: 280
If you lowered the body on the LM cars, the tires are going to rub and the car will not handle well.
KWT is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Stock Class Racing arch2b The Track, Gaithersburg MD 0 2012.07.19 08:19 PM
MBMZR hosting event - 11/05/2011 hrdrvr Events 125 2011.11.10 07:24 PM
FS: 3 built AM MR-02 chassis with entire accessory collection builthatch Mini-Z Marketplace 10 2010.03.08 08:08 PM
ATOMIC RC World Race 2009 HKSHOBBY Atomic Mini-Z World Cup 81 2009.11.30 09:44 AM
HFAY Stock Motor Class Shaun Tracks and GTGs 2 2006.11.12 12:25 PM


All times are GMT -5. The time now is 04:36 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts