Can anyone tell me if the stock motor in an F1 will work OK in a Mini Z Mr02 without blowing up the FETS ?
We run Mini Zs in an Nascar oval and they have become rather slow compared to our AMZ cars....we thought that the F1 motors might make them a bit more fun.
..so...just to clarify....the stock F1 motor is OK...AND the X Racer motor is OKas well? No FET issues with either?
Yes, you are fine to run those with the stock fets. if you are running ASF 2.4 boards you can very safely run 50T or slower motors.
biggest thing is making sure you don't try to power off a wall when your stuck as that is what can/will pop a fet on a stock board even with a stock motor. More experienced drivers should have to worry about that at all.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»