I have however a few worries....
The suspension is probably binding somewhere as it tends to bounce a little in the rear when taking curves at speed. ....
setup now:
in front:
supplied springs and Kyoshos 0 degree knuckles(plastic) +3 atomic dish wheel.
a .2mm washer above spring to fill void.
in rear:
supplied springs, black
TGR friction damper with supplied spring and TGR friction grease.
.8mm suspension plates on the side. 2 nuts above the bottom plate for droop as atomicmods suggestion.
Anybody out there driving the sinister that has ideas?
thanks!
/Johnny
__________________ Team B.E.R.T
MR02/3 eating MA010
MR-03
HFAY S9 F1 Winner
Sinister V1
MRCG Prototype
MRCG 1.0 The uk's premier shop for mini-z Bleeding Edge Racing UK
Are you running the original king-pins in front?
I think the quality and fit of them are well not the best and the knuckles can be moved side to side with them.
I guess it would be easy to modify a Atomic king-pin to fit (shopping off the e-clip part) and then the fit for the knuckles would be better.
i just give the originals a polish(in a dremel or drill)the same as i do with my atomic pins,the stockers are stainless too
__________________ Team B.E.R.T
MR02/3 eating MA010
MR-03
HFAY S9 F1 Winner
Sinister V1
MRCG Prototype
MRCG 1.0 The uk's premier shop for mini-z Bleeding Edge Racing UK
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»