I finally got the Robitronic lap counter so I could add support for it in the software. From my testing I think I have it properly working now but would like it if someone else could test as well.
The main thing to be aware of with the Robitronic hardware is that it may delay transmitting information up to 1 second. So when you cross the lap counter the beep can be delayed up to a second. The software will adjust the lap time to componsate for this delay. I can not do anything else about the delay that is how the hardware works, it transmits the lap information every second and not when it occurs.
If you do test this please let me know if it does or does not work for you.
__________________
Power Is Nothing Without Control
So has anyone had a chance to test the Robitronic support? There have been quite a few downloads but no one has said anything. I think it is working fine but have only used the hardware on my work bench and not on a track for a lengthy race with multiple vehicles.
For those of you who have tried it out please let me know if it does or does not work well.
Thanks
__________________
Power Is Nothing Without Control
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»