Here's my latest Mini-z,a 2.4 AWD specs are,
MR03 pcb (no more annoying reverse delay with 2.4ghz )
Full bearings
Titanium centre shaft
1* front and 2* rear Alloy knuckles
0* front and 1.5* rear toe
ATM ball diffs
PN 70t HFAY spec motor.
I've had this for about a month now, fitted bearings,rare Kyosho block tyres and the alloys so far...
But i recently converted my (already 2.4ghz) F1 over to an mr03 board,bye bye reverse delay! I had a spare 2.4 board so thought what the hell.
So i now have a 2.4ghz MZM :::
Next i'll be robbing the oil filled shocks off the OL for it.
I now have this 99% done.I have fitted Li-Fe's to it,i used the atomic ones on this and it took some modding to get them to fit properly. I have attached pics showing where i had to remove one set of battery terminals and some of the chassis to accomodate them.
If you want to use Li-Fe's on any chassis without modding it,go for the R246 ones,if you're prepared to convert a chassis to Li-Fe only then the atomic's are fine.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»