I have just done my first fet job with my new 2.4 ASF board. I replaced the stock 3010 with 8858CZ. Now the problem, on one of the under board fet, I accidentally break the connection surface (I think its pin 3) and lost the connection where you supposed to solder the pin to during removal of the stock fet. I managed to jump the connection by scratching the board a bit and extend it using soldering lead. My concern is how do I know that the fet(pin 3) does really touch the connector to the board. Is there a better way to fix this. And what is the effect if one of the pin does not touch the connector on the board.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»