Is there any reason not to power a transponder with ICS port? I'm doing this now with my Robitronic transponders, but was not sure if this may harm something else.
dont think so,the guys in germany have been running the giro-z off their ad and 2.4g ics for ages
__________________ Team B.E.R.T
MR02/3 eating MA010
MR-03
HFAY S9 F1 Winner
Sinister V1
MRCG Prototype
MRCG 1.0 The uk's premier shop for mini-z Bleeding Edge Racing UK
That's the Robitronics transponder right? Does it register fine through the tinted windshield like that? We're setting up a track for friendly racing and considered getting one of those scoring systems, but I had my doubts about the IR signal getting through the windshield.
I just bought the Mini JST plugs that have 3 wires (red, black and white in that order) I assume I only need two of these wires to power my iLap transponder. Which wires do I use to power up my transponder.
I've attached a picture of the plugs I just bought for reference.
I just bought the Mini JST plugs that have 3 wires (red, black and white in that order) I assume I only need two of these wires to power my iLap transponder. Which wires do I use to power up my transponder.
I've attached a picture of the plugs I just bought for reference.
Does any one know the current draw of an AMB PT, I have wired mine to the ICS but seem to have a weaker signal. Not sure the board is supplying enough juice to it. While my 02 works fine my 2.4 F1 now misses laps with the transponder in the same location as it was when it was wired to the battery leads. Has anyone seen any degradation of signal with other types of transponders?
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»