On the MR03 it would be 3mm rear with 1mm front. On the MA010 I would use 2.5mm front with 2mm rears. But 3mm can fit, but I feel that it makes it a little more sluggish, and is more protected by the body at 2mm. With 3.5mm fronts (the equivalent of 1mm front on the MR03W or MR02), there is more distance from the tire to the kingpin, so there will be more clearance issues.
__________________
EMUracing Micro RC Syndicate /DG Designs /GSR /Reflex Racing /Fast By Faqish /MurderTown Racing
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»