Mods:
- Aluminium front diff cover
- Aluminium front 0º camber knuckles
- steel universal shafts front & rear
- bearings
- hard springs in the front
- X speed V motor
- Crystal adapt and replacement cover
- SAS Ver-III rear set up
- 10º Tires all round
- Kyosho multi offset rims
Yeah it's good. If I were racing competitively then I'd play around with it more, but I only race on concrete so I'm not racing against the clock. Also I like to be able to swap bodies around easily so I had to purchase the 90-94mm plates.
oh.. sorry but I have no recommandation. It's just that my MA-010 got very hot and the motor is "inside" the chassi, unlike MR-03.
A motor that gets too hot will not work as well.
Maybe someone here got a tip or maybe any solution out there actually is good enough. I'm not the one to ask.
__________________
Artificial intelligence is no match for natural stupidity
oh.. sorry but I have no recommandation. It's just that my MA-010 got very hot and the motor is "inside" the chassi, unlike MR-03.
A motor that gets too hot will not work as well.
Maybe someone here got a tip or maybe any solution out there actually is good enough. I'm not the one to ask.
I run the Atomic Stock Yellow Label motor. Plenty of power and runs significantly cooler than other motors I tried.
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated.
The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year. Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All!
Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Action RC2
]
Linear Mode
