Mini-Z, Kyosho Mini-Z Racer, MR-03, MR-02, MA-010, Forums, News, Pictures, Parts, and Shop - Mini-ZRacer.com
Forums, Mini-Z, MiniZ, Kyosho Mini-Z, Kyosho MiniZ, Kyosho Mini-Z Racer
Mini-Z Hop-Ups, Mini-Z Parts, MiniZ Hop-Ups, MiniZ Parts, Kyosho Mini-Z Hop-Ups, Kyosho Mini-Z Parts, Kyosho MiniZ Hop-Ups, Kyosho MiniZ Parts, Kyosho Mini-Z Racer Hop-Ups, Racer Kyosho Mini-Z Parts
Old 2002.04.07, 02:19 PM   #1
SkylineR34man
¼Sexy man ^^^^
 
SkylineR34man's Avatar
 
Join Date: Mar 2002
Location: Miami
Posts: 278
Send a message via AIM to SkylineR34man
what does this do???????

I am going to buy some new alloy front nuckles, but they come only in 3 degre. What does the 3 degre nuckles do?? oh btw the alloy ones are a bit expensive so how are the nylon ones??? nay good?
thanks in advanced
Skyline
__________________
Waiting for my Overland...sigh*
SkylineR34man is offline  
Old 2002.04.07, 06:46 PM   #2
mryung
Registered User
 
Join Date: Mar 2002
Location: Hong Kong
Posts: 110
Send a message via ICQ to mryung
For my opinion, I suggest you to buy the nylon one instead of alloy because nylon one is durable enough and light in weight.
__________________
Thomas

A Mini-Z player in Hong Kong.
mryung is offline  
Old 2002.04.07, 07:43 PM   #3
Russ
Super Moderator
 
Russ's Avatar
 
Join Date: Nov 2001
Location: Atlanta, GA
Posts: 1,448
Send a message via AIM to Russ
the 3 degree means 3 degrees of camber, as in the tops of the wheels tilt inward 3 degrees. I replace my plastic parts with alloy as I break them and see the need for alloy in a certain place. I broke a set of nylon knuckles, and therefore upgraded to alloy 2 degree

If you are looking at the front of the car, the front tires will look like this:

/---\

It adds traction when turning, and creates more oversteer, but only if your tires are flat across and not rounded like the new, stock, kyosho tires.

Hope this helps!!
__________________
Russ

--------------------------------------------
Russ is offline  
Old 2002.04.07, 09:58 PM   #4
Wedginator
Registered User
 
Join Date: Dec 2001
Location: Toronto ON Canada
Posts: 2,006
Send a message via ICQ to Wedginator Send a message via MSN to Wedginator
so Russ, which is the better camber angle? 3 deg or 2 deg?
Wedginator is offline  
Old 2002.04.07, 11:19 PM   #5
Russ
Super Moderator
 
Russ's Avatar
 
Join Date: Nov 2001
Location: Atlanta, GA
Posts: 1,448
Send a message via AIM to Russ
hard to tell somtimes, but mostly depends on how much your car pushes in the turns, or how much understeer it has, and if you want to get rid if it.

I run 2 degree, if that says anything. But yeah, I just can't say which one is the best, because sometimes 1 deg. is the best, and sometimes 3 is the best, ya know??
__________________
Russ

--------------------------------------------
Russ is offline  
Old 2002.04.07, 11:49 PM   #6
SkylineR34man
¼Sexy man ^^^^
 
SkylineR34man's Avatar
 
Join Date: Mar 2002
Location: Miami
Posts: 278
Send a message via AIM to SkylineR34man
Thanks 4 taking ur time writing Russ it helped alot!!!!!!!!!!
__________________
Waiting for my Overland...sigh*
SkylineR34man is offline  
Old 2002.04.08, 09:21 PM   #7
mini-z
Administrator
 
mini-z's Avatar
 
Join Date: Nov 2001
Posts: 8,497
SkylineR34man, I would avoid the nylon ones, they are really fragile. Go with the alloys.
mini-z is offline  
Old 2002.04.09, 03:59 AM   #8
PorscheGuy964
House Plant
 
PorscheGuy964's Avatar
 
Join Date: Dec 2001
Location: SoCal
Posts: 843
Send a message via AIM to PorscheGuy964
R34man, yes you definatly should go with alloy steering knuckles. They won't break,although I'm sure someone with someday, and the travel alot smoother along the kingpin, even more so if its a stainless steel king pin. Plus nothing beats the look of ally parts on a mini-z....
__________________
My mini-z is an A.I.V.
PorscheGuy964 is offline  
Old 2002.04.11, 01:44 AM   #9
herman
Registered User
 
Join Date: Nov 2001
Location: makati, philippines
Posts: 8,702
yep... having more camber (the higher the degree's) will have you turn more aggresively into the turns. choosing the right camber would depend on how aggresive you would want to turn into the curves, and how technical the track is. normally the more turns the track has, the more camber you want.

to turn more aggresively into turns you can try this, take out the stabilizer bar in front, and place the springs over the steering knuckle where the steering pins are... aside from making your car turn more aggresively into the curves, this provides independent suspension (without costing a cent )... hope this helps.
herman is offline  
Old 2002.04.11, 09:53 AM   #10
Ken Mifune
2-Z or not 2-Z...
 
Ken Mifune's Avatar
 
Join Date: Nov 2001
Location: The Open Road
Posts: 2,678
what camber?

Isn't real camber when you change the angle of the axis of steering? In this case it would be the angle of the king pin.
So, to increase camber you would need to angle the king pin back. (or back and in).
Ken Mifune is offline  
Old 2002.04.11, 10:04 AM   #11
Russ
Super Moderator
 
Russ's Avatar
 
Join Date: Nov 2001
Location: Atlanta, GA
Posts: 1,448
Send a message via AIM to Russ
Ken, that's caster Camber is indeed tilting the tops of the wheels in, and caster is the rake of the kingpin. And toe is toe. Hehehe...
__________________
Russ

--------------------------------------------
Russ is offline  
Old 2002.04.11, 11:39 AM   #12
Ken Mifune
2-Z or not 2-Z...
 
Ken Mifune's Avatar
 
Join Date: Nov 2001
Location: The Open Road
Posts: 2,678
I thought caster is how far the axle is set back from the king pin.

Last edited by Russ; 2002.11.06 at 06:58 PM.
Ken Mifune is offline  
 

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
what is camber and caster? herman Setups 1 2008.03.27 11:38 PM
Camber Question Jebroni Setups 5 2008.03.27 07:21 AM
CAMBER ADJUSTMENTS? anyone know of knuckles? PoorZDriver Setups 18 2005.01.09 12:38 AM
increase camber and toe-in with stock knuckles aznracer2003 Mini-Z Racer MR-02 9 2004.10.16 12:58 AM
Camber sets jcostantino Parts and Hop-ups 2 2002.01.02 02:43 PM


All times are GMT -5. The time now is 10:18 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2011 Mini-ZRacer.com
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products

more»
Tiny RC Community News
[03/22/17] MZR was on vacation, didn't... : All kidding aside, the host experienced a bit of a server meltdown last week and efforts to restore the site to a new server took longer than anticipated. The current server is temporary until - more»
[11/25/15] Did You Hear? Our Black... : Hey Racers,
We're getting started a bit early with our Black Friday sale this year.  Generally we're not supporters of retailers opening early on Thanksgiving, but in our case, we're - more»
[06/30/15] shop.tinyrc.com: Have You... : Hey All! Just a quick reminder to everyone that we post all of our shop.tinyrc.com Newletters here on the MZR Forum. If for some reason you miss them in your email inbox, you can always see the - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts