2010.02.02, 01:51 AM
|
#1
|
yes, it's a boxer
Join Date: Dec 2005
Location: Seaville, NJ
Posts: 929
|
FS: 2 built AM MR-02 chassis with entire accessory collection
Name: Jared M.
Location: Southern New Jersey, USA
Contact: private message builthatch
Description: now ONE built AM MR-02 chassis and accessories
Price: see below in RED next to each item
Payment: Paypal preferred
I have been out of Mini-Z for some time and some details are cloudy, so I’m listing what I recall/know. However, I can tell you that I am a perfectionist through and through and my cars show it. Everything is in FANTASTIC condition. No expense was spared when I set these cars up a few years back. I surely spent over $2000 dollars on the cars, parts, accessories, as well as some other related Mini-Z items not in this sale, which is absolutely sickening.
Please note these are AM board cars! I know ASF is hot. If you prefer, swap in an ASF board (AFAIK you can keep the cemented pot, etc. from the AM board) and you have yourself some really hopped up runners. Or, keep the AM boards and enjoy them!
User RUF from Reflex Racing did the internal work on all of these, if applicable. That means delrin gear installation, cementing pots, FET stack, gold terminal swaps, etc. RUF was my model for setting these things up and getting them dialed appropriately. The lone exception is the owner of Action RC in NY helped me with the terminal swap and delrin gear installation on the stock class McLaren chassis.
MR-02 #1 *MOD CLASS silver McLaren* - SOLD
AM board with PN Racing 0113 FET stack (2x2)
Kyosho ball diff with Reflex HCCA balls
Kyosho Ti diff shaft
Kyosho carbon h-plates
Kyosho shim set
Kyosho stainless steel pins
Kyosho alloy 1* knuckles
Atomic Titanium screw set
Kyosho GOLD terminals swapped into gray strong chassis bottom
Kyosho smoked chassis top/battery clips
Kyosho nylock wheel nuts
Cemented potentiometer
Kyosho delrin servo gears
PN front spring set
Atomic Ti plate disc damper
Atomic LCG motor mount
Atomic Z2 motor with (if I recall) silver brushes
PN delrin pinion
MZR.com dry race bearing set
RCKenon 8 degree radials
Silver McLaren body with all parts accounted for but has some repair work done. Also has a crack in the windshield. I used this body 99% of the time and it shows, but it tried to keep it as nice as possible.
MR-02 #2 *STOCK CLASS orange McLaren* - $125 + SHIP
Stock AM board
Kyosho ball diff with Reflex HCCA balls
Kyosho Ti diff shaft
Kyosho carbon h-plates
Kyosho shim set
Kyosho stainless steel pins
Kyosho alloy 1* knuckles
Atomic Titanium screw set
Kyosho GOLD terminals swapped into gray strong chassis bottom
Kyosho smoked chassis top/battery clips
Kyosho nylock wheel nuts
Cemented potentiometer
Kyosho delrin servo gears
PN front spring set
Atomic Ti plate disc damper
Atomic LCG motor mount
PN Speedy 05 BB can with Kyosho X-Speed armature
PN delrin pinion
PN motor wires
MZR.com dry race bearing set
RCKenon 8 degree radials
Orange McLaren body in very good shape. I believe I had to re-glue a mirror and part of the spoiler. I didn’t use this body while racing with other cars, hence the good condition.
MR-02 #3 *stock class Enzo w/o body* - SOLD
stock AM board with Reflex Racing cemeted pot
Kyosho ball diff
Kyosho titanium diff shaft
Kyosho carbon h-plates
Kyosho shim set
Kyosho alloy nylock wheel nuts
Kyosho stainless steel pins
Kyosho delrin servo gear set
cemented potentiometer
PN front spring set
PN carbon disc damper
Atomic Ver. III alloy motor mount
PN Speedy 05 BB motor
MZR.com dry race bearing set
RCKenon 8 degree radials
This car (#3) has been run once after assembly, for about 20 laps on my home RCP track and then put on the shelf. I ran my McLarens the rest of the time.
Also available, new in package(s)-
2 new sets of MZR.com dry race bearings - SOLD
4 new sets of RCKenon 8 degree front radials + 2 new sets of RCKenon 8 degree rear radials + PN racing tape - $10 + SHIP for 6 sets of tires and tape
1 new set (plastic, F+R) Kyosho McLaren wheels - $5 + SHIP
1 new Atomic Z2 motor + bag of PN "I-MAC" motor wires - $25 + SHIP
Also available, used - ALL SOLD
AM board with servo motor
Futaba 2PL AM radio with 4 AM crystal sets, has multiple model profile capability - perfect for Mini-Z
lntegy INDI Booster3 discharger (AAA/AA)(not pictured)
Intellect 750 AAA batteries (8)
Older picture before I stored them
Current picture
Current picture
Current picture
Last edited by builthatch; 2010.02.24 at 12:09 PM.
|
|
|
2010.02.02, 08:59 PM
|
#2
|
yes, it's a boxer
Join Date: Dec 2005
Location: Seaville, NJ
Posts: 929
|
ok, due to popular demand, i split the dang lot up!
|
|
|
2010.02.03, 09:46 PM
|
#3
|
yes, it's a boxer
Join Date: Dec 2005
Location: Seaville, NJ
Posts: 929
|
lot price lowered to 400.
|
|
|
2010.02.04, 04:33 PM
|
#4
|
yes, it's a boxer
Join Date: Dec 2005
Location: Seaville, NJ
Posts: 929
|
#3 "Enzo" chassis sold!
lot price dropped to 300 plus shipping.
|
|
|
2010.02.05, 11:52 PM
|
#5
|
yes, it's a boxer
Join Date: Dec 2005
Location: Seaville, NJ
Posts: 929
|
two tire sets sold.
bump!
|
|
|
2010.02.07, 01:46 PM
|
#6
|
yes, it's a boxer
Join Date: Dec 2005
Location: Seaville, NJ
Posts: 929
|
still available!
|
|
|
2010.02.09, 04:18 PM
|
#7
|
yes, it's a boxer
Join Date: Dec 2005
Location: Seaville, NJ
Posts: 929
|
ok, AM board sold + both bearing sets.
|
|
|
2010.02.14, 07:28 PM
|
#8
|
yes, it's a boxer
Join Date: Dec 2005
Location: Seaville, NJ
Posts: 929
|
first post updated!
|
|
|
2010.02.23, 05:17 PM
|
#9
|
yes, it's a boxer
Join Date: Dec 2005
Location: Seaville, NJ
Posts: 929
|
been gone for a few days.
up to the top!
|
|
|
2010.02.24, 12:01 PM
|
#10
|
yes, it's a boxer
Join Date: Dec 2005
Location: Seaville, NJ
Posts: 929
|
mod mclaren sold
radio sold
battery discharger sold
batteries sold
top post updated to show what is still available.
|
|
|
2010.03.08, 08:08 PM
|
#11
|
yes, it's a boxer
Join Date: Dec 2005
Location: Seaville, NJ
Posts: 929
|
up to the top.
|
|
|
Thread Tools |
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 04:01 AM.
|
|